潔凈室與其它廠房有本質上的不同，它是一個空氣相對密閉的廠房，一旦發生火災，彩鋼夾芯板芯材的有毒氣體不易排除，直接威脅人的健康。

Clean room is essentially different from other factories. It is a relatively closed factory with relatively closed air. Once a fire occurs, the toxic gas of color steel sandwich plate core material is not easy to eliminate, which directly threatens people's health.

潔凈室建造是一項系統工程，通常是在土建框架主體結構營造的大空間內，采用符合要求的裝修材料，根據工藝要求進行分隔、裝修成滿足各種使用要求的潔凈室。潔凈室內的污染控制需凈化空調專業與自動控制專業共同完成。

Clean room construction is a systematic project, usually in the large space built by the main structure of the civil engineering framework, using the decoration materials that meet the requirements, according to the process requirements for separation and decoration into a clean room to meet the various use requirements.The pollution control of clean room should be completed together by purifying air conditioning major and automatic control major.

潔凈室內的隔斷墻體對彩鋼板有什么技術要求呢？

What technical requirement does the clean indoor partition wall have to color steel plate?

隨著新標準的貫徹實施，對潔凈室彩鋼板提出了更高的要求。

With the implementation of the new standard, higher requirements for clean room color steel plate.

潔凈室內的隔斷墻體采用品質優良的雙面復合夾心凈化彩鋼板、加以玻璃窗隔墻。隔墻須抵達隔熱、隔音、防腐、防火、易清潔消毒。彩鋼板墻面與空中、彩鋼板墻面之間交接處采用半徑不小于30mm的環氧樹脂噴塑鋁合金圓弧處置。彩鋼板拼縫應密封處置。密封膠需用進口醫用密封膠，不得產生揮發性有毒氣體。彩鋼板外表涂層、圓弧環氧樹脂噴涂資料和拼縫密封資料均須具有抗靜電性能，可避免有害顆粒被吸附到墻體外表。彩鋼板裝置前須試擺。過道隔斷墻采用進口氧化鋁處置的半高雙層鋼化玻璃窗(雙層玻璃內含可調鋁合金百葉)。玻璃厚度為8mm,下緣距地1100mm。區距離離外墻采用12mm噴砂鋼化玻璃。

The partition wall of the clean room adopts the good quality double-sided composite sandwich purification color steel plate, and tries the glass window partition wall.The partition wall must reach heat insulation, sound insulation, corrosion prevention, fire prevention, easy to clean and disinfect.Arm aluminum alloy with the radius of no less than 30mm.The color steel plate joint shall be sealed disposed.The sealant shall be imported medical sealant and shall not produce volatile toxic gases.The exterior coating of color steel plate, arc epoxy resin spraying data and seam sealing data must all have anti-static properties to avoid harmful particles from being absorbed to the surface of the wall.Color steel plate device must be tested before the installation.The aisle partition wall adopts semi-high double-layer tempered glass Windows disposed of imported aluminum oxide (with adjustable aluminum alloy blinds).Glass thickness is 8mm and the lower edge is 1100mm from the ground.Sandblasted tempered glass is used 12mm away from the outer wall.