彩涂板的鍍層就繞不開彩涂板的基板，順便也可以講一講鍍鋅板。彩涂板的基板可以分為（常用的，不常用的就暫不介紹）：冷軋、電鍍（冷鍍）、熱鍍鋅和熱鍍鋁鋅。彩涂板規格中，Z180是指：每平米（/㎡）的彩涂板雙面鍍鋅（其化學符號為Zn，Z是其簡寫）量為180g；AZ150是指每平米（/㎡）的彩涂板雙面鍍鋁（其化學符號為Al，A是其簡寫）鋅量為150g。

The coating of color coating plate can not open the substrate of color coating plate, incidentally also can talk about galvanized plate. The substrate of color coating plate can be divided into (commonly used, not commonly used is not introduced): cold rolling, electroplating (cold plating), hot plated galvanizing and hot plated aluminum zinc. In the specification of color coating board, Z180 refers to the amount of zinc plating per square meter (/ ㎡) (its chemical symbol is Zn, Z is 180g; AZ 150 refers to the zinc amount of color coating plate per square meter (/ ㎡) aluminum plating (its chemical symbol is Al, A is abbreviated) is 150g.

由冷軋基板生產的彩色板，具有平滑美麗的外觀，且具有冷軋板的加工性能；但是表面涂層的任何細小劃傷都會把冷軋基 板暴露在空氣中，從而使露鐵處很快生成紅銹。因此這類產品只能用于要求不高的臨時隔離措施和作室內用材。這里面冷軋板（對應國標里面的“原板”）就是一塊鐵，上面鍍層、涂層那些就像穿衣一樣一層一層將其包裹使其免于同空氣中的氧氣接觸。所以，彩涂板容不容易生銹就是看鍍層涂層厚不厚、質量好不好。

The colored plate produced by the cold-rolled substrate has a smooth and beautiful appearance and has the machining performance of a cold-rolled plate; but any small scratch on the surface coating will expose the cold-rolled substrate to the air and thus quickly produce red rust at the exposed place. Therefore, this kind of products can only be used for low-demand temporary isolation measures and for indoor materials. The cold rolled plate (corresponding to the "original plate" inside the national standard) is a piece of iron, above the coating, coating those like dressing layer by layer to wrap it from contact with the oxygen in the air. Therefore, the color coating plate capacity is not easy to rust is to see the coating layer thick thick, good quality.

理論上彩涂板的鍍層、涂層不被破壞的話其使用年限等于實驗室里面的試驗結論年限（大于20年結論的霧鹽實驗）。

Theoretically, if the coating and coating of the color coating board are not destroyed, its service life is equal to the test conclusion life in the laboratory (more than the fog salt experiment of 20 years).

我國白色家電產能主要集中在廣東、安徽、江蘇、浙江以及山東等地，彩涂板行業由于受運輸半徑限制，目前仍以區域競爭為主。上游客戶較為集中以及家電產品對于穩定性的要求，使得產品進入需要較長時間的產品驗證。

China's white goods production capacity is mainly concentrated in Guangdong, Anhui, Jiangsu, Zhejiang and Shandong and other places. Due to the limited transportation radius, the color coating plate industry is still dominated by regional competition. The concentration of upstream customers and the requirements for the stability of home appliance products make it take a long time for product verification.