高強鋼是彩涂產品的發展趨勢之一，目前國外使用比較多的是屈服強度為350等級的彩涂鋼板。生產這類強度的鋼板通常有兩種工藝，一是采用碳錳鋼，在煉鋼時采用C、Mn等強化元素，并利用強大的熱軋、冷軋軋制力來生產相對較薄的高強彩涂鋼板，像馬鋼等國內外全流程鋼廠（礦石到成品）都采用這樣的生產工藝。另一種方法就是通過降低熱鍍鋅機組的退火溫度，使材料沒有完全退火，還部分保留軋硬態來提高強度，目前國內多數鍍鋅及彩涂廠是采用這個工藝，因?yàn)樗麄儧](méi)有煉鋼工序，在市場上購買軋硬卷或熱軋板也沒有相應的高強鋼種。

High strength steel is one of the development trends of color coating products. At present, the yield strength of 350 grade is more commonly used abroad. There are usually two processes for the production of such strength steel plate, one is to use carbon manganese steel, C, Mn and other strengthening elements, and the strong hot and cold rolling force to produce relatively thin high strength color coated steel plate, such as Maanshan Steel and other domestic and foreign steel mills (ore to finished products) are using such production process. Another method is to reduce the annealing temperature of hot galvanizing unit, make the material is not completely annealing, also part of the rolling state to improve the strength, at present most domestic galvanizing and color coating factory is using this process, because they have no steelmaking process, in the market to buy rolling roll or hot rolled plate has no corresponding high strength steel.

高強度PCM彩涂鋼板基材為高強度鋼板，高強度鋼板正面設有鈍化層，鈍化層上涂有底漆層，底漆層上涂有水性輥涂面漆層。采用高強度鋼板生產PCM彩涂鋼板，鋼板的屈服強度YP≥400Mpa，抗拉強度TS≥450Mpa。如使用普通鋼板生產，需要0.5mm以上厚度才能滿足使用要求，而使用高強度鋼板生產，0.4mm以下厚度就可達到同樣的性能要求,從而可以降低冰箱的生產成本，具有強度高、不易變形等特點。鋼板的表面上使用水性輥涂漆可以使生產過程環?；?/font>、表面硬度高，豐滿度好。

The substrate of high strength PCM color coated steel plate is high strength steel plate. The front of the high strength steel plate is equipped with passivation layer, and the passivation layer is coated with water-based roller coating layer. High strength plates were used to produce PCM color-coated plates, with yield strength YP 400 Mpa and tensile strength TS 450 Mpa. If the use of ordinary steel plate production, need more than 0.5mm thickness to meet the requirements of use, and the use of high strength steel plate production, 0.4mm below the thickness can achieve the same performance requirements, so as to reduce the production cost of refrigerators, with the characteristics of high strength, not easy to deformation and so on. The use of water roller paint on the surface of steel plate can make the production process environmentally friendly, high surface hardness and good fullness.

一般工業建筑的設計使用年限為15-20年，馬鋼彩涂鋼板在設計年限內是不需要更換的。馬鋼普通（PE）彩涂板的建筑，使用時間已經10年，到目前為止顏色、涂層等性能變化并不大，彩涂板完好無損。但如果采用一般的彩涂鋼板，使用壽命通常為3-5年，甚至更短，在設計期內至少需要更換2次。

The design service life of general industrial buildings is 15-20 years, and the Masteel color-coated steel plate does not need to be replaced within the design life. Masteel ordinary (PE) color coating plate building, the use of time has been 10 years, so far the color, coating and other performance changes are not much, the color coating plate is intact. However, if the general color-coated steel plate is used, the service life is usually 3-5 years, or even shorter, and it needs to be replaced at least two times during the design period.

由于馬鋼彩涂板良好的實物質量，在市場上馬鋼彩涂板的價格比一般低價彩涂板貴幾百元一噸，但是如果按一般彩涂板在設計使用年限內更換一次測算的話，使用馬鋼彩涂板的成本只是一般彩涂板的60％左右。由此推算馬鋼彩涂板的售價可以比一般彩涂板售價貴50%左右，這還不考慮其它影響，如對企業形象影響，更換維護時對生產影響等。

Due to the good physical quality of Masteel color coating plate, the price of Shangma steel color coating plate is several hundred yuan a ton more expensive than the general low price color coating plate, but if the general color coating plate is replaced within the design service life, the cost of using Masteel color coating plate is only about 60% of the general color coating board. From this calculation, the price of Masteel color coating plate can be about 50% more expensive than the general color coating plate price, which does not consider other effects, such as the impact on the corporate image, the replacement and maintenance of the production impact.

佛山市萬慶物資有限公司自認為是專業的涂鍍鋼材產品專家，積累十多年的鍍鋅、鍍鋁鋅彩涂卷的銷售經驗，對于彩板的材質、強度，顏色等簡直是如數家珍。聯系我們吧~13380241768陳生

Foshan Wanqing Materials Co., Ltd. thinks it is a professional coated steel product expert, accumulated more than ten years of galvanized, galvanized zinc color coating sales experience, for the color plate material, strength, color and so on is simply like a treasure. Contact us ~13380241768 Chen Sheng